alloy pipe
Alloy pipe is a kind of seamless pipe, but the performance of alloy tubes is much higher than seamless steel tubes. Because alloy pipe contains much more Cr inside, high temperature resistance, low temperature resistance, corrosion resistance is higher than other seamless steel tubes; alloy tubes have wide applications in oil, aerospace, chemical, electric power, boiler, and military industry etc. Moreover, alloy tubes are made of high quality carbon steel, alloy structural steel and stainless heat resistant steel by hot rolling and cold rolling.
Name: Alloy Pipe
Steel grade:16-50Mn, 27SiMn, 40Cr, 12-42CrMo 16Mn12Cr1MoV, T91 27SiMn 30CrMo 15CrMo 20G Cr9Mo 10CrMo910 15Mo3 15CrMoV 35CrMoV 45CrMo, 15CrMoG, 12CrMoV, 45Cr, 50Cr, 45CrNiMo
Standard: ASME SA210/ASME SA213/ASTM A335/DIN17175
Specifications:
O.D.: 28-168; W.T.: 2∼30; L: max 12000
Applications:
Alloy pipe is primarily used in power plant, nuclear power, high pressure boiler, high temperature superheater and reheater of high temperature and pressure pipeline and equipment.
Advantages:
Alloy steel pipe can be 100% recovery and in accord with environmental protection, energy and resource saving.The Classification of Alloy Steel Pipe: Alloy pipe for structure and high pressure heat resistant alloy pipe
Chemical Compositions:
Standard | Steel Grade | Chemical Compositions(%) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | Al | W | Ti | Nb | N | ||
ASME SA210 | SA210A | 0.13~0.19 | ≥0.1 | 0.45~0.65 | ≤0.030 | ≤0.030 | ||||||||||
SA210C | 0.18~0.24 | ≥0.1 | 0.80~1.10 | ≤0.030 | ≤0.030 | |||||||||||
ASME SA213 | T11 | 0.05~0.15 | 0.50~1.0 | 0.30~0.60 | ≤0.030 | ≤0.030 | 1.00~1.50 | 0.50~1.00 | ||||||||
T12 | 0.05~0.15 | ≤0.50 | 0.30~0.61 | ≤0.030 | ≤0.030 | 0.80~1.25 | 0.44~0.65 | |||||||||
T22 | 0.05~0.15 | ≤0.50 | 0.30~0.60 | ≤0.030 | ≤0.010 | 1.90~2.60 | 0.87~1.13 | |||||||||
T23 | 0.04~0.10 | ≤0.50 | 0.10~0.60 | ≤0.030 | ≤0.030 | 1.90~2.60 | 0.05~0.30 | ≤0.030 | 1.45~1.75 | B 0.0005~0.006 | 0.02~0.08 | ≤0.040 | ||||
T91 | 0.08~0.12 | 0.20~0.50 | 0.30~0.60 | ≤0.020 | ≤0.010 | 8.00~9.50 | 0.85~1.05 | ≤0.40 | 0.18~0.25 | ≤0.015 | 0.06~0.10 | 0.03~0.07 | ||||
T92 | 0.07~0.13 | ≤0.50 | 0.30~0.60 | ≤0.020 | ≤0.010 | 8.50~9.50 | 0.30~0.60 | ≤0.40 | 0.15~0.25 | ≤0.015 | 1.50~2.00 | B 0.001~0.006 | 0.04~0.09 | 0.03~0.07 | ||
DIN17175 | ST45.8/Ⅲ | ≤0.21 | 0.10~0.35 | 0.40~1.20 | ≤0.040 | ≤0.040 | ||||||||||
15Mo3 | 0.12~0.20 | 0.10~0.35 | 0.40~0.80 | ≤0.035 | ≤0.035 | 0.25~0.35 | ||||||||||
13CrMo44 | 0.10~0.18 | 0.10~0.35 | 0.40~0.70 | ≤0.035 | ≤0.035 | 0.70~1.10 | 0.45~0.65 | |||||||||
10CrMo910 | 0.08~0.15 | ≤0.50 | 0.30~0.70 | ≤0.025 | ≤0.020 | 2.00~2.50 | 0.90~1.10 | ≤0.30 | ≤0.30 | ≤0.015 | ||||||
ASTM A335 | P5 | 0.15 | 0.50 | 0.30-0.60 | 0.025 | 4.00-6.00 | 0.45-0.65 | |||||||||
P9 | 0.15 | 0.50 | 0.30-0.60 | 0.025 | 4.00-6.00 | 0.45-0.65 | ||||||||||
P11 | 0.05-0.60 | 0.50-1.00 | 0.30-0.60 | 0.025 | 0.025 | 1.00-1.50 | 0.44-0.65 | |||||||||
P22 | 0.05-0.15 | 0.50-1.00 | 0.30-0.60 | 0.025 | 0.025 | 1.90-2.60 | 0.87-1.13 | |||||||||
P91 | 0.08-0.12 | 0.50 | 0.30-0.60 | 0.025 | 4.00-6.00 | 0.45-0.65 | ||||||||||
P92 | 0.07–0.13 | 0.50 max | 0.30–0.60 | 0.02 | 0.01 | 8.50–9.50 | 0.30–0.60 | 0.4max | 0.15-0.25 | 0.02max | 1.5-2.00 | 0.01max | 0.03-0.07 |
Mechanical Properties:
Standard | Steel Grade | Mechanical Properties | |||
---|---|---|---|---|---|
Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) | Hardness | ||
ASME SA210 | SA210A | ≥415 | ≥255 | ≥30 | ≤143HB |
SA210C | ≥485 | ≥275 | ≥30 | ≤179HB | |
ASME SA213 | T11 | ≥415 | ≥205 | ≥30 | ≤163HB |
T12 | ≥415 | ≥220 | ≥30 | ≤163HB | |
T22 | ≥415 | ≥205 | ≥30 | ≤163HB | |
T23 | ≥510 | ≥400 | ≥20 | ≤220HB | |
T91 | ≥585 | ≥415 | ≥20 | ≤250HB | |
T92 | ≥620 | ≥440 | ≥20 | ≤250HB | |
DIN17175 | ST45.8/Ⅲ | 410~530 | ≥255 | ≥21 | / |
15Mo3 | 450~600 | ≥270 | ≥22 | / | |
13CrMo44 | 440~590 | ≥290 | ≥22 | / | |
10CrMo910 | 480~630 | ≥280 | ≥20 | / | |
ASTM A335 | P5 | 415 | 205 | 30/20 | / |
P9 | / | ||||
P11 | / | ||||
P22 | / | ||||
P91 | / | ||||
P92 | 620 | 440 | 20 | / |
Specializing in various kinds of OCTG pipes production and supplying, Ourway steel subsidiary of AGICO group is a professional alloy pipe manufacturer and supplier in the international trade. We keep enough in stock in the warehouse every month. Besides, we keep a good relationship with every big steel factory in China, so we can guarantee the delivery time and competitive prices for customers. Therefore, if you have any inquiry on alloy pipes, please don‘t hesitate to contact us by e-mail or ring us!